Price range: ₨2,000.000 through ₨5,500.000
Type:
This product is an acrylic copolymer based putty.
Features and benefits:
Easy application. Provides an excellent base for subsequent coats. Free from harmful chemicals like APEO,
formaldehyde, heavy metals etc.
Recommended use:
Ideal for interior surfaces.
Substrate:
Cement plaster, concrete, block work, rendered surfaces, gypsum board etc.
Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface
undulations, cracks, pin holes etc., should be rectified/filled before starting painting.
Application data:
The product can be applied by
Putty knife
Film thickness per coat
Typical recommended range
Dry film thickness 85 – 130 µm
Wet film thickness 165 – 250 µm
Film thickness will vary and is calculated as average.
Theoretical spreading rate 6 – 4 m²/l
Spreading rate per coat : 2.8 m²/kg (Theoretical)
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.
The average spreading rate per coat can be confirmed at site by a trial application.
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Thinner:
Water
Dilution:
Maximum 5 %
Conditions during application:
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying.
| Size | 4 Ltr, 20 Ltr |
|---|
Reviews
There are no reviews yet.