Description

Application data:
The product can be applied by
Roller : Recommended.
Spray : Use airless spray or conventional spray.
Brush : Recommended to paint corners and edges.

Film thickness per coat
Typical recommended range:
Dry film thickness 25 – 35 µm
Wet film thickness 80 – 110 µm
Film thickness will vary and is calculated as average. Film thickness per coat values are presented here.
Theoretical spreading rate 12.8 – 9.2 m²/l
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Thinner:
Water
Dilution:
Maximum 10 %
Conditions during application:
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying.
Drying times:
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will
be affected correspondingly.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the
total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.